EN|CN
current location

return

LED Module

LED Strips

Customized Signs

Other accessories

Led Ring Light

5050 led strip

    Product Specification

     

    Product5050 Series

    Product Name: led flexible strips

    Part NoSMD5050

    Applicable placeCover lighting, architectural lights for canopy, corridor, windoe, archway

    Scope of applicationinterior and exterior LED lighting

     

    Product Features

    1.Adopts high brightness SMD5050 as light source

    2.Double layer copper FPC.

    3.Pure white ,warm white ,red ,green ,blue and yellow are available.

    4. Input 12v/24v DC the length can be customized.

    5. 3-led(12v dc) and 6-led(24v dc) as a unit and can be cut by different length.

    6.Stick 3M adhesive tape on the back

     

    Installation

    Taking off the protection sheet of 3M adhesive tape on the back of the LED strip when installation, then stick it to the installed location.

     

    Warranty

    2years

     

    Electric Parameters

    Part No.

    LED source

    Leds/piece

    Luminous efficacy(lm/W)

    IP

    Voltage(V DC)

    Size(mm)

    Power(W/piece)

    BLC-LS-5050W150

    5050

    150

     

     

     

    20-22

     

     

    IP20/54/65/66

    12/24

     

     

    5000*10*2.1

    36

    BLC-LS-5050W300

    5050

    300

    12/24

    72

    BLC-LS-5050W600

    5050

    600

    24

    144

    Testing environment temperature is 25±2℃;

    The above data are typical values, the actual data of the product may be different from the typical data. Data is subject to change without prior notice.

    The modules are high-power products, can not use double-side power supply method.

    Connection diagram:

    20161101151503_0008.jpg

    Notice

    Pls kindly connect to the LED driver in accordance with the connection diagram.

    Installation surface must be smooth and clean, otherwise the product will fall off.

    Avoiding to bend at the location of LED and resistor when installation, so as to damage the product and influence the lifespan.

    Pls note to be anti-static when installation and usage, and sharp object to touch the product is not allowed.

    Dont touch the acid and alkali corrosion chemicals when installation and usage.

    Minimum bend radius of the product can not be less than 30MM.